P0C91
Hybrid/EV Battery Temperature Sensor J Circuit Intermittent/Erratic
P0C91 watches for a sensor J reading that changes too fast and too often for a heavy battery. GM's tables 16OBDG02 and 19OBDG02 add up how far the value moves between samples over a 10-sample window taken every 100 ms; a sum above 10 fails the window, and 4 failing windows out of 5, about half a second, store the code, Type B over two trips. The check needs more than 10.2 V and working communication. The reading may stay within its valid range, which distinguishes P0C91 from P0C8F and P0C90. Mitsubishi's PHEV has nothing comparable for this channel. Likely culprits are a worn contact or a conductor broken under its insulation; if neighbouring sensors jump at the same moment, suspect the monitoring board.
Possible causes
- Fretting or loose terminal in the sensor J plug high
- Conductor broken inside the insulation, opening under vibration medium
- Unstable reference or ground on the monitoring board low
Symptoms
- Warning lamp that comes and goes between drives
- Sensor J value jumping in live data
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0C91
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.