OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0C8E

Hybrid/EV Battery Temperature Sensor J Circuit Range/Performance

P0C8E sets when sensor J delivers an electrically valid temperature that disagrees with the other modules. For the 2012 Volt, table 12OBDG01A runs the check only after propulsion, off-board charging and battery conditioning have all been inactive for more than 21,600 s, so the pack should be evenly soaked; a gap above 25.3 °C to the mean of the remaining sensors in 50 of 67 samples fails it, Type B. The 2019 GM table 19OBDG02 keeps the logic with a 25.00 °C limit. Mitsubishi, on the 2018 Outlander PHEV, calls it rationality of sensor [09] and accepts a much smaller gap of 13 °C once the car has stood for 3,600 s. A loosened sensor or a real hot spot is more likely than a wiring fault; P0C8F and P0C90 cover shorts and opens.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberC / 8E

Possible causes

  • Thermistor J drifted but still within its electrical range high
  • Sensor J no longer pressed against its cell group medium
  • Actual temperature difference from a weak cell or blocked cooling path low

Symptoms

  • Warning lamp appearing after the car has been parked for many hours
  • Battery power reduced while the pack is cold or warm

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0C8E

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication