P0C8D
Hybrid/EV Battery Temperature Sensor J Circuit
P0C8D covers electrical trouble in the circuit of battery temperature sensor J that the controller cannot pin down to a low, high or jumping signal. There is no public manufacturer documentation for P0C8D. GM's 2011 hybrid table counts J as temperature sensor 10 in a list of sixteen, yet like its later tables it only defines the narrower J codes P0C8E to P0C91; Mitsubishi's Outlander PHEV assigns J to module sensor [09] and likewise uses only rationality, short and open codes. Under CARB rule (e)(15.3.1) every such input must be watched all the time for plausible values and an unbroken circuit. Without a valid J reading the battery management protects that cell group by cutting charge and discharge power.
Possible causes
- Corroded or loose plug between sensor J and the monitoring board high
- Thermistor J electrically defective medium
- Faulty input channel on the cell monitoring board low
Symptoms
- Hybrid system warning, on many models also the check-engine lamp
- Less electric power and slower charging
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0C8D
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.