P0C8A
Hybrid/EV Battery Temperature Sensor I Circuit Low
P0C8A records a sensor I voltage below the valid band. As the element is an NTC thermistor fed through a pull-up, a low voltage translates into a cell group that seems dangerously hot, typically caused by a short to ground. GM's 2012 Volt table (12OBDG01A) trips above 87.5 °C, an ADC count under 680, for 1.4 s within 2 s, two trips; the 2019 table 19OBDG02 instead fails above 160 °C in 8 of 10 samples, Type B. Bulletin 18-NA-342 assigns it to sensor 9 as the low-voltage fault. Mitsubishi's 2022 Outlander PHEV records a short of channel [08] under 0.12 V, above 125 °C, after 2 s and names the battery module or cell monitoring unit as the part to replace. P0C8B covers the open circuit, P0A7E a pack that really overheats.
Possible causes
- Sensor I signal shorted to ground high
- Thermistor I shorted, for example after coolant or moisture entry medium
- Cell monitoring unit input for sensor I faulty low
Symptoms
- Warning lamp with reduced power
- Sensor I shown extremely hot in live data
- Battery cooling running continuously
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0C8A
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.