OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0C89

Hybrid/EV Battery Temperature Sensor I Circuit Range/Performance

P0C89 says sensor I delivers an electrically valid but implausible temperature. GM checks it against the average of the remaining sensors: the 2019 table 19OBDG02 fails it beyond 25 °C in 50 of 67 samples, Type B, two trips, and suspends the test while a low, high or communication fault is present; the 2016 Cadillac ELR table (16OBDG01) uses 20 °C. Bulletin 18-NA-342 calls it sensor 9 performance on the Volt and lists it among the codes cured by reprogramming the hybrid powertrain control module 2. Mitsubishi's 2018 Outlander PHEV treats it as rationality of channel [08], one check per drive after an hour parked, with a 13 °C limit held for 0.32 s. If a software update does not help, a misplaced or drifting thermistor is the likely cause.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberC / 89

Possible causes

  • Module software setting the code falsely, fixed by reprogramming (GM Volt) medium
  • Thermistor I drifted within its electrical range high
  • Sensor I displaced from its measuring point medium
  • Real local heating at the cell group of sensor I low

Symptoms

  • Check-engine or hybrid lamp, often after a long rest
  • Battery power reduced

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0C89

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication