OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0C88

Hybrid/EV Battery Temperature Sensor I Circuit

P0C88 is the general circuit code for battery temperature sensor I, chosen when the fault is electrical but not classified as low, high or erratic. No manufacturer documents P0C88 publicly. In GM's Volt pack sensor I is the ninth and last thermistor (bulletin 18-NA-342); the 2012 Volt table 12OBDG01A and GM's later tables cover it only through the specific codes P0C89 to P0C8C. Packs with more sensors, such as Mitsubishi's Outlander PHEV with 50, carry the letter as channel [08]. CARB section (e)(15.3.1) requires continuous range and continuity checks on such inputs. With channel I unreliable, the battery controller falls back to cautious power limits. Older code lists show this number as reserved, so some scan tools may not name it.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberC / 88

Possible causes

  • Connector fault on the sensor I circuit high
  • Thermistor I failed medium
  • Defective input channel in the battery sensing electronics low

Symptoms

  • Hybrid or EV warning lamp
  • Reduced electric power
  • Generic scan tools may show the code without a description

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0C88

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication