P0C87
Hybrid/EV Battery Temperature Sensor G/H Correlation
P0C87 checks that battery temperature sensors G and H tell a consistent story. The controller would set it when, after enough rest for the pack to equalise, the two values remain apart by more than a calibrated margin. No manufacturer documents this pair code publicly. In the Volt, GM numbers G and H as sensors 7 and 8 and, in its 2012 table 12OBDG01A, compares each one with the average of the others after more than 21,600 s off, failing it beyond 25.3 °C as P0C7D or P0C82, Type B. Mitsubishi's 2022 Outlander PHEV logs sensors [06] and [07] the same way against a 13 °C limit. A pair code cannot say which of the two is wrong, so live data after a cold soak decides. The neighbouring pair code is P0C86 (F/G).
Possible causes
- Thermistor G or H drifted while staying in range high
- Sensor G or H detached from its cell group medium
- Real temperature gap from a weak cell group or blocked cooling medium
- Battery module software needing an update low
Symptoms
- Hybrid or EV warning lamp
- Reduced charge and discharge power
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0C87
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.