OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0C86

Hybrid/EV Battery Temperature Sensor F/G Correlation

P0C86 compares the neighbouring battery temperature sensors F and G with each other. After the pack has rested, both should settle to nearly the same value; a persistent gap means at least one reads wrong although neither circuit is open or shorted. No manufacturer documents P0C86 publicly. GM and Mitsubishi test plausibility against the pack average instead and store the single sensor: GM's 2019 table 19OBDG02 uses a 25 °C margin for P0C34 (sensor 6) and P0C7D (sensor 7), Mitsubishi's 2018 Outlander PHEV 13 °C after 3,600 s soak. CARB lets manufacturers define the rationality checks for such inputs. If a real gap shows, uneven cooling between the two module groups deserves a look. The E/F pair is P0C72, G/H is P0C87.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberC / 86

Possible causes

  • Thermistor F or G drifted without an electrical fault high
  • Sensor F or G no longer in contact with its module medium
  • Real temperature difference between the two module groups medium
  • Battery management calibration with an overly narrow window low

Symptoms

  • Hybrid or EV warning lamp
  • Somewhat reduced battery power
  • Sensors F and G far apart in live data after a cold soak

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0C86

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication