P0C85
Hybrid/EV Battery Temperature Sensor H Circuit Intermittent/Erratic
P0C85 points to a sensor H reading that flickers. A battery pack warms and cools slowly, so fast swings in one channel suggest an electrical contact problem rather than real heat. GM's 2018 hybrid table 18OBDG02 adds up how much the value moves within a 10-sample window at 100 ms per sample; once that sum passes 10 in 4 of 5 evaluations, the module logs P0C85, Type B over two trips, as long as the supply exceeds 10.2 V and the battery interface module is talking. The 2019 table 19OBDG02 keeps the same rule. GM's OBDG01 tables of 2011 to 2016 (first-generation Volt, ELR) and Mitsubishi list no such code for sensor H. A wiggle test on the harness while watching live data usually finds the fault; low or high voltage faults are P0C83 and P0C84 instead.
Possible causes
- Intermittent contact at the sensor H terminal high
- Partly broken sensor H wire inside the pack harness medium
- Noisy measuring channel on the sensing board low
Symptoms
- Intermittent warning lamp
- Sensor H value jumping in live data
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0C85
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.