P0C83
Hybrid/EV Battery Temperature Sensor H Circuit Low
P0C83 stands for a sensor H voltage under its permitted range, which with an NTC thermistor reads as heat: a short to ground or a shorted element makes the cell group seem far too hot. GM's 2016 Cadillac ELR table (16OBDG01) fails it above 87.5 °C, an ADC count below 680, for 1.4 s in a 2 s window, two trips; the Volt bulletin 18-NA-342 files it as the low-voltage fault of sensor 8. Mitsubishi's Outlander PHEV of 2018 reports a short of sensor [07] once the voltage sits below 0.12 V, beyond 125 °C, for 2 s, and points to the battery module or its cell monitoring unit. P0C84 is the matching high-voltage fault, P0C82 the plausibility test. Because the controller must assume a hot spot, it cuts power and may run the battery cooling hard.
Possible causes
- Sensor H signal shorted to ground or to the pack housing high
- Shorted thermistor H medium
- Fault in the cell monitoring unit that reads sensor H low
Symptoms
- Hybrid warning lamp and strong power reduction
- Live data shows sensor H far hotter than its neighbours
- Battery cooling running at full effort
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0C83
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.