P0C82
Hybrid/EV Battery Temperature Sensor H Circuit Range/Performance
P0C82 is the plausibility test for sensor H: its circuit is fine, but the temperature it reports strays too far from what the rest of the pack says. On the 2016 Cadillac ELR (16OBDG01) GM fails it when the reading differs from the average of the other module groups by more than 20 °C in 50 of 67 samples, Type B; the 2019 table 19OBDG02 allows 25 °C, sampled every 25 ms and only while no low, high or communication fault is active. Mitsubishi files it under sensor [07] in the Outlander PHEV and checks once per drive after an hour of soak against a 13 °C limit. GM bulletin 18-NA-342 names it sensor 8 performance and treats false sets on the Volt with reprogramming. A sensor that came loose from its cells or slowly drifted is the typical real cause.
Possible causes
- Thermistor H reading off while still electrically valid high
- Sensor H lifted off its module, measuring air instead of cells medium
- Outdated battery module software (GM Volt, 18-NA-342) medium
- Genuine local temperature difference from poor coolant flow low
Symptoms
- Check-engine or hybrid lamp, often after the car has stood for a while
- Battery power limited
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0C82
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.