P0C80
Hybrid/EV Battery Temperature Sensor G Circuit Intermittent/Erratic
P0C80 catches a sensor G signal that jumps around instead of following the slow thermal drift of a large battery. GM spells out the logic in its hybrid tables 18OBDG02 and 19OBDG02: every 100 ms the module sums the absolute changes of the reading across a 10-sample window, a total above 10 fails that window, and 4 failed windows out of 5 set the code as Type B, two trips, provided system voltage exceeds 10.2 V and the battery interface module is communicating. Mitsubishi's Outlander PHEV has no erratic code for this sensor. The value stays inside its valid range, which separates P0C80 from P0C7E and P0C7F; a loose terminal or a cracked conductor is the usual reason. When several sensors on one board jump together, suspect the board or its supply.
Possible causes
- Loose or fretting terminal in the sensor G connector high
- Conductor cracked inside the insulation, breaking under vibration medium
- Cell monitoring board with unstable reference or ground low
Symptoms
- Warning lamp that may come and go between trips
- Jumping sensor G value in live data
- Occasional power reduction
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0C80
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.