P0C7D
Hybrid/EV Battery Temperature Sensor G Circuit Range/Performance
P0C7D flags sensor G when its value is electrically valid but does not fit the rest of the pack. GM's 2012 Volt table (12OBDG01A) compares it with the average of the other sensors once propulsion has been off for more than 21,600 s and fails it beyond 25.3 °C in 50 of 67 samples, Type B with two trips; bulletin 18-NA-342 calls it sensor 7 performance. Mitsubishi's Outlander PHEV of 2018 files it as rationality of sensor [06]: after at least 3,600 s soak, with the pack between −30 and 60 °C, a 13 °C gap from the 50-sensor average held for 0.32 s sets it, checked once per drive. Shorts and opens have their own codes P0C7E and P0C7F. Usual causes are a drifting or detached thermistor; GM also fixed false sets on the Volt with new module software.
Possible causes
- Thermistor G drifted while staying inside its electrical range high
- Sensor G no longer seated against its cell group medium
- Battery module software setting the code falsely (GM Volt, 18-NA-342) medium
- Real temperature difference from a weak cell or blocked cooling channel low
Symptoms
- Check-engine or hybrid warning lamp after a long parking period
- Reduced battery power, sometimes a battery-too-cold message
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0C7D
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.