OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0C7A

Drive Motor B Inverter Voltage Too High

P0C7A is the overvoltage code for the inverter of drive motor B, which on many all-wheel-drive hybrids is the rear motor. Mitsubishi documents it for the Outlander PHEV: in the 2018 model the rear motor control unit has a hardware high-voltage switch that closes at 420 V, a higher limit than the 370 V of the front unit, and the code sets after a single trip with the power stage active or after 0.5 s with it switched off. The manual blames the high-voltage circuit or the rear control unit and starts with the rear battery cable connections; the 2023 model keeps the code under a rear-motor overvoltage name. Regeneration spikes, contactor events and sensing errors are the usual suspects. Expect a warning lamp and reduced drive power.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberC / 7A

Possible causes

  • Rear battery cable connection loose at the rear motor control unit medium
  • Rear motor control unit or its voltage detection faulty medium
  • Voltage spike from regeneration or a contactor event medium

Symptoms

  • Hybrid or EV warning lamp
  • Reduced drive power, rear axle drive may be unavailable

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0C7A

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication