OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0C77

Hybrid/EV Battery System Precharge Time Too Short

P0C77 is stored when the inverter side reaches battery voltage too quickly during precharge. Before the main contactor closes, the controller charges the inverter capacitor through a precharge resistor and watches the ratio of bus to battery voltage. GM's 2011 Volt sets the code if that ratio passes 95 % within 50 ms of precharge start, Type A; the 2013 eAssist uses 75 ms, Type B, and both require the bus to be below 40 V beforehand. A rise that fast suggests a bypassed or shorted resistor, a main contactor that is welded or closes early, or far less capacitance on the bus than expected. Chrysler lists P0C77 for the 2017 Pacifica Hybrid together with a high-voltage cable that had worked loose on the inverter terminal (08-107-17). Propulsion may be unavailable.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberC / 77

Possible causes

  • Main contactor welded or closing before precharge ends medium
  • Precharge resistor bypassed or shorted medium
  • Loose high-voltage cable leaving the inverter capacitor partly disconnected medium
  • Faulty bus or battery voltage measurement low

Symptoms

  • Malfunction indicator or hybrid warning lamp
  • Vehicle does not become ready or loses propulsion

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0C77

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication