OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0C76

Hybrid/EV Battery System Discharge Time Too Long

P0C76 means the high-voltage bus is still too high a set time after the contactors opened, so the inverter capacitor was not drained as intended. GM publishes thresholds: the 2011 Volt flags more than 200 V after 3.5 s (Special Type C, no MIL), the 2013 eAssist cars more than 65 V after 6.5 s and the 2019 tables more than 200 V after 3.5 s, both Type A after two failed runs. Bulletins name welded contactors on the 2019 Volt (software update, N192226060), a high-voltage cable that had worked loose on the inverter terminal of the 2017 Pacifica Hybrid (08-107-17) and, on GM two-mode trucks, jump-starting with the key on (PIT4585E). A failed discharge circuit is the classic part fault. Treat the bus as live until measured.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberC / 76

Possible causes

  • Active discharge circuit or discharge resistor in the inverter failed high
  • Main contactor welded closed so the battery keeps feeding the bus medium
  • Loose high-voltage cable or terminal at the inverter medium
  • Low 12 V supply during shutdown or module software low

Symptoms

  • Hybrid warning lamp or service high voltage message
  • Vehicle may not start or become ready
  • Loss of propulsion

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0C76

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication