OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0C75

Hybrid/EV Battery System Discharge Time Too Short

P0C75 is logged when the high-voltage bus loses its voltage faster than expected after the contactors open. At shutdown the inverter's DC-link capacitor is drained through a discharge resistor or an active discharge circuit, and from capacitance and resistance the controller knows roughly how long that should take. A much quicker drop points to lost capacitance, a lower resistance than designed, a leakage path or a wrong voltage reading. A capacitor diagnostic patent (EP2682769B1) uses the same comparison to detect capacitor ageing. No manufacturer documents P0C75 publicly; GM publishes only the opposite check, P0C76. The driver usually sees a hybrid warning lamp, and depending on the make the next start may be blocked.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberC / 75

Possible causes

  • DC-link capacitor lost capacitance through ageing or damage medium
  • Additional load or leakage path on the high-voltage bus medium
  • Bus voltage measured incorrectly by the inverter or battery module medium
  • Discharge resistor or circuit with too low a resistance low

Symptoms

  • Hybrid or EV system warning lamp
  • Vehicle may not become ready to drive

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0C75

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication