OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0C73

Motor Electronics Coolant Pump A Control Performance

P0C73 reports that coolant pump A of the motor electronics, the loop that cools the inverter and often the drive motor, does not run the way the controller commands. Kia's bulletins for Niro and Carnival hybrids use exactly this name. The 2018 Outlander PHEV sets it when, with at least 30 % pump command for over 2 s, pump speed stays between 100 and 1,000 rpm or exceeds 5,300 rpm for 0.5 s; Mitsubishi lists air in the loop, wrong coolant level or mix and frozen coolant first. Toyota tied P0C73 on the 2014-2016 Highlander Hybrid to water corroding the inverter pump connector, Kia to water entering the pump can, Mercedes (M264) to trapped air. Battery pack pump faults use P0C47-P0C4D. Power is reduced to protect the inverter.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberC / 73

Possible causes

  • Air trapped in the inverter cooling loop, often after coolant service high
  • Water ingress and corrosion at the pump connector or inside the pump housing medium
  • Low coolant level, wrong mixture or frozen coolant medium
  • Electric pump worn or seized medium
  • Control-unit software with faulty judgement logic low

Symptoms

  • Malfunction indicator lamp or hybrid warning lamp
  • Coolant warning in the instrument cluster
  • Reduced electric drive power at high load

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P0C73

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 4 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication