P0C71
Hybrid/EV Battery Temperature Sensor D/E Correlation
P0C71 checks whether battery temperature sensors D and E agree with each other. Both sit in the same pack, so after a long soak they should report almost the same value; a lasting gap means one of them reads wrong although its circuit looks healthy. No manufacturer documents P0C71 publicly. GM and Mitsubishi run this plausibility test against the pack average instead and log the single sensor: on the eAssist cars (13OBDG05C) GM flags sensor 4 (P0AE9) or sensor 5 (P0BC3) beyond 8.55 °C after more than 21,600 s off, Type B, while the 2022 Outlander PHEV tolerates 13 °C after one hour. P0C70 covers the C/D pair and P0C72 the E/F pair; open or shorted sensors set their own circuit codes.
Possible causes
- Thermistor D or E drifted while staying inside its electrical range high
- Sensor no longer pressed against its cell or module medium
- Genuine temperature difference from uneven cooling or a weak cell group medium
- Battery management software with an overly tight comparison low
Symptoms
- Hybrid or EV system warning lamp
- Reduced battery charge and discharge power
- Battery cooling running more often than usual
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0C71
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.