P0C70
Hybrid/EV Battery Temperature Sensor C/D Correlation
P0C70 is the correlation check between battery temperature sensors C and D. The controller expects both to settle at nearly the same value once the pack has rested, and it stores the code when their difference stays too large. No manufacturer documents P0C70 publicly. Where GM and Mitsubishi publish this monitor, they compare each sensor with the pack average and name the single sensor; GM's sensor 4 code P0AE9 is the D counterpart. Before replacing parts it is worth knowing that GM cured false sets of these Volt sensor codes, shown with a battery-too-cold message, by reprogramming the module (18-NA-342). Genuine faults are a drifting thermistor, a sensor that lost contact with its cells, or uneven cooling. The battery controller usually limits power. P0C71 continues with D/E.
Possible causes
- Thermistor C or D drifted out of agreement with the other high
- Battery control software that sets the code falsely, for example in cold weather medium
- Sensor C or D detached from its cell group medium
- Uneven cooling across the pack, such as a blocked air duct or coolant channel low
Symptoms
- Malfunction indicator lamp or EV system warning
- Message asking to plug in or warm the battery
- Reduced electric power and slower charging
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0C70
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.