OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0C6F

Hybrid/EV Battery Temperature Sensor B/C Correlation

P0C6F sets when battery temperature sensors B and C disagree by more than the calibrated margin. Sensor B also takes part in the A/B check (P0C6E), so the pattern of stored codes helps: if P0C6E and P0C6F appear together, B is the shared suspect, while P0C6F alone points more towards C. No manufacturer documents P0C6F publicly. A Toyota patent describes a second way to catch such faults while the pack is working: if the spread between sensors is large during charging or discharging and one output barely moves, that sensor is treated as frozen. GM files the physical fault per sensor; on the eAssist, sensor 3 is P0ACB with 8.55 °C after six hours off. A real local hot spot inside a module can also open the gap.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberC / 6F

Possible causes

  • Sensor C reading off, especially when P0C6F is stored alone high
  • Sensor B reading off, likely when P0C6E is stored as well medium
  • Sensor output stuck at one value while the pack temperature changes medium
  • Real local heating in a module, for example from a cell with high resistance low

Symptoms

  • Hybrid or EV system warning
  • Power or charging rate limited
  • Displayed battery temperatures differ noticeably in live data

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0C6F

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication