P0C6E
Hybrid/EV Battery Temperature Sensor A/B Correlation
P0C6E compares two battery temperature sensors, A and B, with each other rather than judging either one alone. After a long rest the pack should be close to one temperature, so a lasting gap between the two points to a sensor that reads wrongly while staying electrically valid. No manufacturer documents P0C6E publicly; GM and Mitsubishi run the same idea against the pack average and store per-sensor codes instead. GM's eAssist table 13OBDG05C flags sensor 1 (P0A9C) or sensor 2 (P0AC6) beyond 8.55 °C after more than six hours off, Type B; Mitsubishi's 2022 Outlander PHEV allows 13 °C after one hour of soak. A Subaru patent compares a sensor pair after parking once both cool at a similar rate. P0C6F covers the B/C pair.
Possible causes
- Thermistor A or B drifted while staying inside its electrical range high
- Sensor no longer seated against its cell or module medium
- Genuine temperature difference from uneven cooling or a weak cell group medium
- Battery management software with an over-sensitive comparison low
Symptoms
- Hybrid or EV system warning lamp
- Reduced charge and discharge power
- Battery fan or cooling running more than usual
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0C6E
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.