P0C6B
Generator Position Sensor Circuit B Low
P0C6B tells you that circuit B of the generator resolver, the cosine winding, reads too low. In the 2023 Outlander PHEV, Mitsubishi stores it if the cosine signal is no higher than 2.000 V throughout 0.21 s; the test never pauses while the generator control unit receives 8 V or more. To confirm a repair, the matching drive cycle only asks for the power supply mode to be switched ON and a wait of five seconds or more. Likely causes are a cosine lead with a short to ground, a pinched harness near the transaxle or a failing winding. If the resolver circuit tests fine and the code returns, Mitsubishi fits a new power drive unit and, once the EV oil cooling has been checked, a new generator. P0C66 is the sine-side twin, P0C6C the high reading on the same line.
Possible causes
- Cosine lead of the resolver shorted to ground high
- Pinched or crushed resolver harness near the transaxle medium
- Shorted cosine winding in the generator resolver medium
- Faulty cosine input in the power drive unit low
Symptoms
- Malfunction indicator lamp right after switching on
- No charging of the drive battery by the engine
- Reduced performance in hybrid mode
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0C6B
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.