OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0C6A

Generator Position Sensor Circuit B Range/Performance

P0C6A concerns circuit B of the generator resolver, the cosine side at Mitsubishi: its signal stays inside the electrical limits but does not agree with what the controller expects. Because sine and cosine together describe one angle, a cosine trace with the wrong amplitude or a drifting centre shows up as a mismatch against circuit A, even though no line is shorted. Possible reasons are a loose or twisted sensor stator, a winding with partial damage, or noise picked up from nearby phase leads. No manufacturer documents P0C6A publicly; Mitsubishi's comparable window check on the 2023 Outlander PHEV (2.1 to 2.9 V, 0.28 s) is stored as P0A4C. Hard low or high readings on this circuit belong to P0C6B and P0C6C; the circuit A version is P0C65.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberC / 6A

Possible causes

  • Loose or twisted resolver stator changing the cosine amplitude medium
  • Partially shorted cosine winding with weakened output medium
  • Noise from phase leads due to damaged shielding or poor routing medium
  • High contact resistance in the circuit B connector low

Symptoms

  • Hybrid warning lamp
  • Generator used only partly or not at all
  • Unusual noise or vibration from the transaxle under load

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0C6A

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication