P0C69
Generator Position Sensor Circuit B
P0C69 is the general fault entry for the second pickup winding of the generator resolver. A resolver needs both windings, set 90 degrees apart, to give an unambiguous rotor angle; with only one, the inverter can no longer place the current in the generator phases correctly. The code applies when circuit B is judged faulty but not classified further. No manufacturer documents P0C69 publicly. At Mitsubishi on the 2023 Outlander PHEV circuit B corresponds to the cosine winding, and that design reports it only through the low and high codes P0C6B and P0C6C. CARB's hybrid rules require the generator to be monitored under an approved plan and circuit faults of input components to be detected. P0C64 is the same entry for circuit A.
Possible causes
- Open or damaged lead in the second resolver pickup winding circuit high
- Bent, corroded or pushed-back pins at the resolver connector medium
- Faulty second pickup winding in the resolver stator medium
- Internal fault in the generator control electronics low
Symptoms
- Hybrid warning or malfunction indicator lamp
- Generator switched off, battery is no longer recharged by the engine
- Limited driving power
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0C69
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.