P0C67
Generator Position Sensor Circuit A High
With P0C67 the controller sees circuit A of the generator resolver stuck above its upper limit. On the 2023 Outlander PHEV Mitsubishi assigns it to the sine winding and trips it once that voltage stays at or above 4.900 V for 0.21 s; the check runs continuously while the generator control unit has 8 V or more. Note the uneven window, since the lower limit is 2.0 V. A lead shorted to a supply potential is the textbook cause, and depending on the input stage an open line can also float high. The Bosch patent on resolver short detection separates both short types by the averaged line potential. Mitsubishi's repair path matches P0C66 and ends with a new power drive unit or generator. P0C6C is the matching cosine code.
Possible causes
- Sine lead of the resolver shorted to a supply or excitation potential high
- Open sine lead that floats high at the input stage medium
- Faulty resolver input in the power drive unit medium
- Insulation fault between windings inside the resolver low
Symptoms
- Malfunction indicator lamp and hybrid warning
- Engine-driven charging stops, battery charge falls faster
- Power limitation or hybrid functions switched off
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0C67
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.