OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0C65

Generator Position Sensor Circuit A Range/Performance

P0C65 flags circuit A of the generator resolver as electrically present but not believable. The trace stays between the hard low and high limits, yet its amplitude, centre voltage or relation to the second winding no longer fits the rotor angle the controller expects, for example after the sensor stator has shifted or when the phase cables couple noise into it. No manufacturer documents P0C65 publicly. Mitsubishi runs an analogous window test on the 2023 Outlander PHEV: a sine or cosine level outside 2.1 to 2.9 V for 0.28 s counts as a plausibility fault, but it is filed under P0A4C for the whole sensor. P0C66 and P0C67 cover hard low and high readings on the same circuit. Typical consequences are a hybrid warning and limited use of the generator.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberC / 65

Possible causes

  • Resolver stator loose or shifted, for instance after work on the generator or transaxle medium
  • Interference from the phase cables because of a misrouted or damaged resolver harness medium
  • Partially damaged winding that weakens the circuit A signal medium
  • Generator control software that misjudges a sound signal low

Symptoms

  • Hybrid system warning light
  • Generator use restricted, less charging while driving
  • Occasional roughness when the engine starts or stops in hybrid mode

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0C65

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication