P0C64
Generator Position Sensor Circuit A
P0C64 is the catch-all entry for the first pickup circuit of the generator resolver, the sensor that reports rotor angle so the inverter can energise the generator phases at the right moment. It is used when the controller judges that circuit faulty without sorting the fault into low, high, implausible or sporadic. No manufacturer documents P0C64 publicly. Mitsubishi shows how such faults get split on the 2023 Outlander PHEV: the sine winding, which it treats as circuit A, has its own low and high codes (P0C66, P0C67), and a failed internal status goes to P0A4B. CARB asks for an approved generator monitoring plan and for circuit and range checks on hybrid inputs. Expect a hybrid system warning and, depending on the design, reduced power or no charging by the engine.
Possible causes
- Open, chafed or shorted lead in the first resolver pickup winding circuit high
- Corroded or loose resolver connector between generator and inverter medium
- Damaged pickup winding inside the generator resolver stator medium
- Fault in the generator control electronics of the inverter or power drive unit low
Symptoms
- Hybrid system or malfunction indicator lamp on
- Engine runs but the high-voltage battery is no longer charged by the generator
- Reduced power or hybrid functions disabled
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0C64
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.