P0C63
Drive Motor B Position Sensor Circuit B Intermittent/Erratic
P0C63 is reserved for short-lived dropouts or erratic jumps on Circuit B, the second winding of the motor B resolver, that do not settle into a steady fault. No manufacturer documents this code publicly. The best public illustration comes from GM's 2008 Tahoe and Yukon Hybrid: a weak crimp at the transmission pass-through connector produced intermittent starting with motor B resolver codes, though GM files them under P0C61 and the general P0A45 and P0A46 rather than an intermittent code. That case shows where to look first, crimp joints, pass-through connectors and harness sections near moving parts. Wiggle tests under live data help catch it. P0C59 is the same fault type on Circuit A of motor B.
Possible causes
- Weak crimp or loose terminal in the motor B S2/S4 path, including pass-through connectors high
- Intermittent wire break near moving powertrain parts medium
- Moisture or corrosion causing unstable contact low
Symptoms
- Intermittent warning lamp
- Occasional start problems or short loss of motor B
- Fault not present during a workshop check
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P0C63
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.