P0C5E
Drive Motor A Position Sensor Circuit B Intermittent/Erratic
P0C5E captures brief interruptions or spikes on Circuit B, the second winding of the motor A resolver, that clear again before a firm low, high or plausibility fault can be confirmed. No manufacturer documents this code publicly. GM leaves such events to the debounce of P0C5C and P0C5D, which on its eAssist cars tolerates short outages and only reports a repeating pattern. Where P0C5E is used, the search starts at the mechanical joints of the S2/S4 path: crimp quality, terminal grip, a cable clip that lets the harness rub on the transmission. Checking resistance while flexing the harness tends to reveal it. P0C54 is the same fault on Circuit A; both together point to the common connector.
Possible causes
- Loose or weak terminal in the S2/S4 path high
- Harness rubbing on the transmission because of a missing or broken clip medium
- Moisture entering the resolver plug low
Symptoms
- Warning light appearing only now and then
- Momentary drop of electric torque
- No fault found on a stationary check
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P0C5E
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.