P0C5D
Drive Motor A Position Sensor Circuit B High
P0C5D means the S2/S4 winding circuit of the motor A resolver, Circuit B, reads a reference level above its ceiling. This hints at an open wire whose input floats toward the supply, or contact with a voltage-carrying conductor. GM applies 4.5 V on most of its hybrids, 4.9 V on the 2019 Volt and a much lower 3.0 V on the 2012 two-mode Tahoe, Yukon, Escalade, Sierra and Silverado. On the 2013 eAssist cars, 20 failed samples out of 30 at 10.4 ms set a two-trip Type B fault; the 2011 Volt uses the same count as a one-trip Type A. When P0C5D appears with P0C53, the shared plug or the resolver itself is more likely than a single wire. No bulletin names this code.
Possible causes
- Open S2 or S4 wire or backed-out terminal high
- S2/S4 line touching a voltage-carrying conductor medium
- Broken S2/S4 winding in the resolver stator medium
- Faulty resolver input stage in the motor control module low
Symptoms
- Check engine lamp after one or two trips depending on the vehicle
- Electric assist or drive unavailable
- Auto stop disabled on mild hybrids
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P0C5D
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.