P0C5C
Drive Motor A Position Sensor Circuit B Low
P0C5C tells that the reference level on the S2/S4 winding of the motor A resolver, Circuit B, has fallen below its floor. GM uses 0.5 V on the 2011 Volt, 2012 two-mode trucks, 2013 eAssist and the 2016 Volt and ELR, 0.10 V on the 2019 Volt; the low side needs a longer confirmation than the high side, for example 0.525 s within 0.8375 s on the 2016 Volt. On the single-motor eAssist it is a two-trip Type B code. Bentley lists P0C5C00 first in its Bentayga Hybrid note 2066714: damaged 12 V transmission wiring, often with P0C5200 and a temperature sensor code P0A2D00, so a harness worn through on one spot can pull down both windings and other motor sensors at once.
Possible causes
- Transmission harness chafed or pinched, grounding an S2/S4 line (Bentley TPI 2066714) high
- Moisture or corrosion in the resolver connector medium
- Shorted S2/S4 winding in the resolver stator medium
Symptoms
- Engine warning light, often with P0C52 and a motor temperature code
- Electric drive limited or switched off
- On mild hybrids loss of start-stop and assist
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P0C5C
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.