OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0C5B

Drive Motor A Position Sensor Circuit B Range/Performance

P0C5B is set when the second resolver winding of motor A (Circuit B) stays within its electrical limits yet carries a signal that does not make sense next to the first winding. Bentley added it in revision 3 of bulletin 2080242 for the Continental GT, GTC and Flying Spur hybrids: P0C5B00 now appears alongside P0C5100 and P0A4000, which shows that both windings lose plausibility at once when the shared connection is poor. The repair path is the same, measured value logs, inspection of the 8-pin and 32-pin plugs for pin drag and corrosion, replacement of a 90-degree connector after approval, then basic settings. No threshold is published. P0C5C to P0C5E are the low, high and sporadic Circuit B faults.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberC / 5B

Possible causes

  • Insufficient terminal grip at the sensor or power electronics connector high
  • Faulty 90-degree connector on affected Bentley hybrids (TPI 2080242/3) medium
  • Corrosion, oil or moisture in the resolver plugs medium

Symptoms

  • Drive system fault shown in the cluster
  • Electric drive mode not available
  • Usually stored together with P0C51 and P0A40

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0C5B

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication