OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0C58

Drive Motor B Position Sensor Circuit A High

P0C58 sets when the S1/S3 winding circuit of the motor B resolver shows a reference level above its window, as from an open lead drifting up or a short to voltage. GM limits are 4.5 V on the 2011 and 2016 Volt, 4.9 V on the 2019 Volt and 3.0 V on the 2012 two-mode trucks, with the fast high-side timing of 20 out of 30 samples on early cars. This is one of the most frequent resolver codes on the first-generation Volt. GM's first note PIC5856 from 2013 already paired P0C58 with P0C62, the S2/S4 high code, on 2011-13 Volts: if wiring is fine, a new motor B position sensor goes in, a part ordered through GM's technical assistance center, and update the module calibration.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberC / 58

Possible causes

  • Faulty motor B position sensor on 2011-13 Volt and 2014-16 ELR (GM PIC5856) high
  • Open S1 or S3 line or spread terminal at the resolver connector medium
  • Motor control module running an older calibration low

Symptoms

  • Check engine lamp, frequently together with P0C62
  • Reduced propulsion power
  • Fault may only be in history memory

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0C58

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication