P0C57
Drive Motor B Position Sensor Circuit A Low
P0C57 means the reference level on Circuit A of the motor B resolver, the S1/S3 winding in GM wiring, has sunk below its limit. GM checks it exactly like the motor A line: under 0.5 V on the 2011 and 2016 Volt and the 2012 two-mode trucks, under 0.10 V on the 2019 Volt, with Type A on the early cars and Type B from 2016. In the field it rarely stands alone. GM preliminary information PIC5856A to F for 2011-13 Volt and 2014-16 ELR groups P0C57 with P0C58 and P0C62: if wiring checks and normal diagnosis find nothing, the motor B position sensor is replaced and the drive motor generator control module is brought to its latest calibration. A genuine harness fault to ground still has to be excluded before any parts are ordered.
Possible causes
- Faulty motor B position sensor (resolver stator) on Volt and ELR (GM PIC5856) high
- Circuit A line of motor B shorted to ground in the harness medium
- Drive motor generator control module not on the latest calibration low
Symptoms
- Service engine soon lamp, current or in history
- Often stored together with P0C58 and P0C62
- Reduced propulsion
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0C57
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.