OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0C56

Drive Motor B Position Sensor Circuit A Range/Performance

P0C56 flags a plausibility problem on Circuit A of the motor B resolver: the winding is connected and its level sits inside the electrical window, yet the signal it carries does not fit, for instance because it wanders or no longer matches the second winding. No manufacturer documents this code publicly. The closest published case is the motor A version P0C51, which Bentley traces to connector pin fit and contamination on its 2025 Continental hybrids. Possible reasons on motor B are the same kind of contact issue, a resolver with weakened output or interference on poorly shielded lines. P0C57 to P0C59 cover hard low, high and sporadic faults, and P0A46 judges the overall motor B angle signal.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberC / 56

Possible causes

  • Poor pin fit or contamination at the motor B resolver connector high
  • Damaged shield or twisted pair letting interference onto Circuit A medium
  • Motor B resolver winding with weakened output medium

Symptoms

  • Hybrid warning and check engine lamp
  • Motor B torque limited or switched off
  • Occasional shudder when motor B takes load

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0C56

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication