P0C54
Drive Motor A Position Sensor Circuit A Intermittent/Erratic
P0C54 stands for short dropouts or jumps on Circuit A of the motor A resolver that never last long enough to count as a steady low or high fault. No manufacturer documents this code publicly. GM handles the same situation differently: on its 2013 eAssist cars the resolver circuit checks run a retry scheme that lets the drive recover from brief faults, and only light the MIL through P0C52 or P0C53 once the trouble repeats, either about 5 s of failure within roughly 10 s or 10 s of accumulated failure over 30 minutes. Typical triggers are loose terminals, a cable that moves with the drivetrain or moisture in the plug. The fault often vanishes after a restart and returns under vibration or heat.
Possible causes
- Loose or poorly crimped terminal in a Circuit A line high
- Harness rubbing or flexing at a point that moves with the powertrain medium
- Moisture or contamination in the resolver plug medium
Symptoms
- Warning lamp that appears and disappears between trips
- Brief loss of electric drive or a short jerk
- Fault often gone after a restart
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P0C54
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.