OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0C51

Drive Motor A Position Sensor Circuit A Range/Performance

P0C51 means the first resolver winding of motor A (Circuit A) delivers a signal that is electrically present but not believable, for example unsteady or out of step with the second winding. Bentley uses it on 2025 Continental GT, GTC and Flying Spur hybrids, logged by the e-drive control unit at address 0051 next to P0A4000 and later P0C5B00, with a drive system message in the cluster. Bulletin 2080242 asks for logged measured values, a check of the sensor and power electronics plugs for bent pins, weak terminal grip, moisture or corrosion, then basic settings; revision 3 adds a new 90-degree connector. No set threshold is published. P0C52 to P0C54 cover low, high and sporadic faults of the same line.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberC / 51

Possible causes

  • Weak terminal grip or bent pins at the sensor or power electronics connector high
  • Moisture, oil or corrosion in the resolver connectors medium
  • Faulty 90-degree connector on the affected Bentley models (TPI 2080242/3) medium
  • Resolver winding with degraded output low

Symptoms

  • Drive system fault message in the instrument cluster
  • No electric or hybrid driving mode available
  • Fault may come and go with temperature or vibration

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0C51

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication