P0C4B
Hybrid/EV Battery Pack Coolant Pump A Supply Voltage Circuit/Open
P0C4B refers to the power feed of battery coolant pump A rather than its command line: the controller sees no or only an implausible supply voltage at the pump, typically because a fuse, relay, connector or wire in the feed is open. Ford documents the code on its 2020 hybrids. On the Escape HEV built up to 10 June 2020, bulletin 20-2221 lists P0C4B with other battery codes in the battery energy control module and cures the MIL by reprogramming PCM and BECM; bulletins 20-2293 and 20-2345 name it for the Explorer and Aviator hybrids. Without a software cause, the fuse and relay in the pump feed come first. CARB requires the electrical components of battery thermal management to be monitored. P0C4C and P0C4D are the low and high variants of the same supply.
Possible causes
- Battery control module software (Ford Escape HEV, Explorer and Aviator 2020) high
- Blown fuse or failed relay in the pump supply medium
- Open feed wire or pushed-out pin at the pump connector low
Symptoms
- MIL on
- Battery coolant pump not running, power limited when warm
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P0C4B
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.