OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0C4A

Hybrid/EV Battery Pack Coolant Pump A Control Performance

P0C4A says pump A runs electrically but does not achieve its cooling effect. The 2011 Chevrolet Volt fails the test when the pump has been on for over 60 s and the pack inlet coolant temperature has moved by less than 5 °C, rated Type B. GM's bulletin PI0798A (Volt 2011–2015, Ampera 2012, ELR 2014–2016) traces the code after draining and refilling to trapped air, cured by a vacuum purge. Porsche explains for the 2018 Panamera 4 E-Hybrid that the pump reports dry running when its speed rises while current drops, a condition that can need a long stretch of driving before it is logged. Audi (Q4 e-tron 2022) and Bentley (Bentayga and Flying Spur Hybrid, EV speed capped near 48 km/h) also bleed first, Ford reflashes the battery module. FCA's Pacifica Hybrid uses P0C4A for inverter overtemperature instead.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberC / 4A

Possible causes

  • Air trapped in the battery coolant loop, often after a coolant service high
  • Low coolant level or a leak in the low-temperature loop medium
  • Worn or failing coolant pump medium
  • Battery control module software (Ford/Lincoln 2020 hybrids) low

Symptoms

  • MIL shortly after cooling system work
  • Electric drive warning, reduced power or capped EV speed
  • Gurgling noise from the coolant loop

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P0C4A

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication