P0C49
Hybrid/EV Battery Pack Coolant Pump A Control Circuit High
P0C49 is set when the control signal to battery coolant pump A remains too high, for example because the line is shorted to battery voltage or, on a pulled-up input, interrupted. Ford uses it on the 2020 Explorer, Police Interceptor Utility and Lincoln Aviator hybrids. Bulletins 20-2293 and 20-2345 list it right after P0C48 among a group of MIL codes for the battery and electronics coolant pumps; Ford traces them to the battery energy control module software and fixes them by reprogramming. GM, by contrast, folds short to power into P0C47. CARB requires the outputs of battery thermal management to be monitored for circuit faults. If the pump actually loses its command, the battery heats up faster under load and the system reduces power. P0C48 is the low counterpart, P0C4D concerns the supply voltage instead.
Possible causes
- Battery control module software (Ford/Lincoln 2020 hybrids, TSB 20-2293/20-2345) high
- Control wire shorted to battery voltage medium
- Control line interrupted at the pump connector low
Symptoms
- MIL on
- Battery power reduced during long climbs or fast charging
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P0C49
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.