OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0C46

Hybrid/EV Battery Pack Coolant Temperature Sensor A Circuit Intermittent/Erratic

P0C46 points to a battery coolant temperature signal that jumps faster than liquid in the loop can physically change temperature. GM's 2019 hybrid tables explain the check: every 100 ms the hybrid controller takes the difference to the previous inlet coolant value, adds up ten of these absolute steps and counts a failure when the sum exceeds 64 °C. Four seconds of failures within a five second window set the code, rated Type B with the MIL on the second trip. The test is suppressed while the hard circuit faults P0C44 or P0C45 are active, so P0C46 usually means a signal that is present but noisy. Loose terminals, contact corrosion or a harness that moves with the battery are the usual causes; wiggling the wiring with live data running helps locate it. Sensor B uses P0CD9.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberC / 46

Possible causes

  • Loose or spread terminal at the coolant sensor connector high
  • Corrosion at connector or ground point medium
  • Harness rubbing or cracked near the battery coolant lines medium

Symptoms

  • MIL that may go out again for a while
  • Jumping coolant temperature in live data

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P0C46

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication