OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0C42

Hybrid/EV Battery Pack Coolant Temperature Sensor A Circuit

P0C42 is the general circuit code for the first coolant temperature sensor in the liquid loop of a hybrid or EV battery, typically placed at the pack inlet. The battery controller uses it to decide when to pump, heat or chill the coolant. Volvo documents P0C4200 in the battery energy control module of the XC90 T8 plug-in hybrid from model year 2016, as either an intermittent or a permanent entry with a possible check engine lamp; according to technical journal TJ 33546, once the current software is verified the entry is simply erased and no parts are needed. GM reports faults of the same sensor more precisely as P0C44 and P0C45. CARB requires the inputs of the battery thermal management to be monitored. P0C43 covers implausible readings, P0CD5 sensor B.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberC / 42

Possible causes

  • Battery controller software flagging the circuit wrongly (Volvo XC90 T8) high
  • Corroded or loose connector or damaged wire at the coolant sensor medium
  • Failed coolant temperature sensor A low

Symptoms

  • Check engine lamp, often without other complaints
  • Battery cooling or heating running on substitute values
  • Reduced charging or drive power in hot or cold weather

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P0C42

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication