P0C40
DC/DC Converter Temperature Sensor B High
P0C40 means the second temperature sensor of the DC/DC converter delivers a voltage above its valid window, which on a thermistor circuit points to a short to positive or an open line pulled up to the reference. Mercedes-Benz documents it for the EQB (series 243) and the G-Class including the electric G 580 (series 465). Information LI54.10-P-079533 describes P0C4000 as a short to positive of temperature sensor B and lists it among up to four converter codes, with P0C3B00, P0E9700 and P0E5400, that appear after the converter wakes up incorrectly. The car shows a red 12 V battery message plus HV warnings. Workshops check the converter with XENTRY, erase the memory and reset the unit before replacing anything. P0C3F is the low counterpart; sensor A uses P0C3B.
Possible causes
- Converter entering a fault state after incorrect wake-up (Mercedes 243/465) high
- Open circuit or short to positive in the sensor B wiring medium
- Internal defect of the DC/DC converter low
Symptoms
- Red 12 V battery message in the instrument cluster
- White or yellow high-voltage warning
- 12 V battery no longer charged while driving
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0C40
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.