P0C3E
DC/DC Converter Temperature Sensor B Range/Performance
P0C3E flags DC/DC converter temperature sensor B as electrically valid but implausible, for instance when it disagrees with sensor A or with what the converter load should produce. FCA uses it on the 2021 Ram 1500 with the 3.6 litre eTorque mild hybrid under the name temperature sensor 2 performance. Bulletin 08-037-21 reflashes the hybrid control processor and changes P0C3E, together with P0C39 for sensor 1, from a two-trip to a one-trip code, so one failed test can light the MIL. CARB requires rationality checks for converter inputs. Typical causes are a drifting element, poor thermal contact or outdated software. Circuit faults of sensor B are reported as P0C3D, P0C3F or P0C40; a converter that is really too hot sets P0D32 instead.
Possible causes
- Outdated hybrid control software (Ram 1500 eTorque, bulletin 08-037-21) medium
- Sensor B drifting or with poor thermal contact medium
- Uneven converter cooling making sensors A and B disagree low
Symptoms
- MIL, after one trip with updated Ram software
- Mild hybrid assist or 12 V supply reduced
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0C3E
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.