P0C3D
DC/DC Converter Temperature Sensor B Circuit
P0C3D is the general circuit code for the second temperature sensor of the DC/DC converter, which turns high-voltage battery power into 12 V supply. Converters with two sensors watch separate parts of the power stage or cross-check one sensor against the other. No manufacturer documents P0C3D publicly. Sensor B itself appears in bulletins: Mercedes-Benz lists P0C4000, a short to positive of sensor B, on the EQB and the G-Class, and Ram the plausibility code P0C3E as temperature sensor 2 on the 2021 1500 eTorque. Sensor A uses P0C38 for the same fault class. CARB requires such converter inputs to be monitored. A circuit fault makes the controller limit or stop the converter, so the 12 V battery may run down and warnings follow.
Possible causes
- Connector or wiring fault in the sensor B circuit high
- Failed temperature element B inside the converter medium
- Converter or hybrid control software misjudging the sensor low
Symptoms
- Hybrid or EV system warning
- 12 V battery warning
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0C3D
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.