P0C3C
DC/DC Converter Temperature Sensor A Intermittent/Erratic
P0C3C covers a signal from DC/DC converter temperature sensor A that drops out or jumps for short moments while staying mostly within range. The heat sink of a converter warms and cools slowly, so fast jumps point to the signal path rather than to real temperature changes. No manufacturer documents P0C3C publicly. The method is known from GM's hybrid tables for comparable thermistors, such as P0C37 for battery sensor F: the controller adds up signal changes in short windows and fails the test when several windows exceed a limit. CARB requires such inputs to be monitored for faults. Typical causes are a loose terminal, vibration damage or moisture at the converter connector. Unlike P0C3A and P0C3B, the fault may vanish between tests, so a wiggle test helps.
Possible causes
- Loose terminal or moisture at the converter connector high
- Harness damaged by vibration with intermittent contact medium
- Intermittent fault inside the converter low
Symptoms
- Intermittent hybrid or EV warning
- Occasional 12 V charging interruptions
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0C3C
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.