OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0C39

DC/DC Converter Temperature Sensor A Range/Performance

P0C39 is the plausibility check of DC/DC converter temperature sensor A: its reading lies within the electrical range but does not fit the converter's operating state or a second sensor. FCA uses it on the 2021 Ram 1500 with the 3.6 litre eTorque mild hybrid, where the code is called temperature sensor 1 performance. Bulletin 08-037-21 updates the HCP software and changes this code from a two-trip to a one-trip DTC, so the MIL can come on after a single fault. Sensor B, sensor 2 at Ram, has the matching code P0C3E. CARB requires rationality checks for such inputs. A drifting sensor or poor thermal contact is typical; outright circuit faults are reported as P0C38, P0C3A or P0C3B instead.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberC / 39

Possible causes

  • Outdated hybrid control software (Ram 1500 eTorque, bulletin 08-037-21) medium
  • Sensor A drifting or with poor thermal contact to the power stage medium
  • Uneven cooling of the converter making the readings disagree low

Symptoms

  • MIL, after one trip with updated Ram software
  • Mild hybrid assist or 12 V supply reduced

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0C39

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication