P0C38
DC/DC Converter Temperature Sensor A Circuit
The DC/DC converter steps the high-voltage battery down to the 12 V system and replaces the alternator in hybrids and EVs. Its power stage carries temperature sensors so the controller can derate before the semiconductors overheat. P0C38 is the general circuit code for sensor A. Hyundai documents it on the 2027 Palisade Hybrid as P0C381C (failure type 1C, voltage out of range): the hybrid warning light comes on after the car has been parked for a long time, and bulletin 26-01-071H and campaign 9D8 cure it with an HPCU software update that improves the detection logic, so the sensor itself is usually fine. CARB requires the converter's inputs to be monitored as comprehensive components. Low, high and erratic signals have their own codes P0C3A to P0C3C.
Possible causes
- Control unit software misjudging the sensor after long parking (Hyundai Palisade Hybrid) high
- Fault in the circuit of sensor A inside the converter or power control unit medium
- Internal fault of the DC/DC converter requiring replacement low
Symptoms
- Hybrid system warning light
- 12 V charging reduced or switched off
- Code appearing after the car has stood for a long time
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0C38
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.