P0C33
Hybrid/EV Battery Temperature Sensor F Circuit
Battery temperature sensor F is the sixth thermistor in the high-voltage pack; GM's Volt bulletin 18-NA-342 lists the F codes under temperature sensor 6 of nine. P0C33 is the general circuit code for an electrical fault the controller does not classify as low, high or erratic. No manufacturer documents this exact code publicly: GM's hybrid tables use only the more specific siblings P0C34 to P0C37. CARB requires battery temperature sensors to be monitored for circuit faults and, where possible, separate codes that point to the smallest replaceable part. With one temperature missing the controller has to assume the worst and limits charge and discharge power. The sensor sits inside the pack, so checks need high-voltage safety procedures.
Possible causes
- Loose or corroded connector of sensor F at the sensing board high
- Failed thermistor F medium
- Faulty input on the battery sensing board or module low
Symptoms
- Hybrid or EV system warning and MIL
- Reduced power or charging rate
- Battery cooling running more than usual
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0C33
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.